-
Various ApplicationsSpray up; hand lay-up; vacuum infusion; resin transfer molding; cold molding; compression molding.
-
Price AdvantageAdvanced productions technology makes our clients’ final product cost 10% lower.
-
Fast DeliveryOur production capacity is around 10tons every day. Usually lead time is around 1-2weeks for an order.
CFM
Continuous filament mat is a new type of non-woven reinforcing material, which is made up of continuous ECR-glass strand. It is bonded directly by coupling agent without bunching. It has the advantages of good isotropy, high strength, fast resin (UP, Vinyl ester and epoxy resins etc.) penetration rate, high product flatness and surface finish, especially suitable for open molding processes: Spray up and hand lay-up etc.
Get A Quote
CSM
Fiberglass chopped mat is a glass fibre reinforcing material made from ECR-glass chopped strand, though non-directional uniformly laid flat, with emulsion or powder binder. Our fiberglass chopped strand are characterised by fast resin (UP, Vinyl ester and epoxy resins etc.,) soaking, easy removal of bubbles, convenient operation, low resin consumption, high transparency and strength of the finished products, etc. It is dedicated to closed molding processes: vacuum infusion processing, resin transfer molding, cold molding and compression molding.
Get A Quote
CSM & CFM Products
CSM - Powder
CSM - Emulsion
CFM - Pultrusion
CFM - Closed Mold Process
Powder glass fibre chopped strand mat is combined with a polyester binder and has excellent wetting properties. It is fluffy and soft, with very good resin wettability, easily to edge, and particularly suitable for environments such as winter, where the resin wettability rate is affected.
Property
Test Method
EMC225-P
EMC300-P
EMC450-P
EMC600-P
EMC900-P
EMC80-P
EMC100-P
EMC120-P
EMC180-P
EMC300-1190-P
EMC450-1190-P
EMC600-1190-P
EMC900-1190-P
EMC1000-P
Area Weight (%)
ISO3374
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
Moisture Content (%)
ISO3344
≤0.15
≤0.15
≤0.15
≤0.15
≤0.15
≤0.15
≤0.15
≤0.15
≤0.15
≤0.2
≤0.2
≤0.2
≤0.2
≤0.2
Binder Content (%)
ISO1887
4.4±0.9
4.0±0.9
3.7±0.8
3.7±0.8
3.5±0.8
9±5
9±5
9±5
9±5
4.2
4.2
4
3.6
5.4
Tensile Strength (N/150mm)
ISO3342
≥80
≥100
≥140
≥160
≥200
≥110
≥130
≥130
≥130
≥450
≥470
≥700
≥850
≥1100
Emulsion glass fibre chopped mats are bonded with an emulsion binder and have a much smoother surface than powdered glass fibre mats. Emulsion chopped mats are suitable for use with resins of the polyester or polyvinyl ester family, which quickly break down the emulsion binder so that the chopped mats can be brushed and rolled more easily and allowed to fit the mould.
Property
Test Method
EMC225-E
EMC300-E
EMC450-E
EMC600-E
EMC900-E
EMC80-E
EMC100-E
EMC120-E
EMC180-E
EMC300-1190-E
EMC450-1190-E
EMC600-1190-E
EMC900-1190-E
EMC1000-E
Area Weight (%)
ISO3374
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
1±6.0
Moisture Content (%)
ISO3344
≤0.15
≤0.15
≤0.15
≤0.15
≤0.15
≤0.15
≤0.15
≤0.15
≤0.15
≤0.2
≤0.2
≤0.2
≤0.2
≤0.2
Binder Content (%)
ISO1887
4.4±0.9
4.0±0.9
3.7±0.8
3.7±0.8
3.5±0.8
9±5
9±5
9±5
9±5
4.2
4.2
4
3.6
5.4
Tensile Strength (N/150mm)
ISO3342
≥80
≥100
≥140
≥160
≥200
≥110
≥130
≥130
≥130
≥450
≥470
≥700
≥850
≥1100
Our CFM for Pultrusion has higher tensile strength which fits the requirement for most challenging profiles and fast pultrusion process speed.
Density(g/m²)
CFM955-225
CFM955-300
CFM955-450
CFM955-600
CFM955-900
CFM885-375/V45
CFM900-225P
CFM900-300P
CFM900-450P
CFM900-600P
Moisture Content(%)
≤ 0.2
≤ 0.2
≤0.2
≤0.2
≤ 0.2
≤ 0.2
≤0.2
≤0.2
≤0.2
≤0.2
Binder Content(%)
1.8 ~ 8.5
1.8 ~ 8.5
1.8 ~ 8.5
1.8 ~ 8.5
1.8 ~ 8.5
1.8 ~ 8.5
1.8 ~ 8.5
1.8 ~ 8.5
1.8 ~ 8.5
1.8 ~ 8.5
Tensile strength (N/75mm)
70
100
140
160
270
200
80
100
150
175
Sizing
Silane
Silane
Silane
Silane
Silane
Silane
Silane
Silane
Silane
Silane
Our CFM for Closed Mold Process provides solutions for efficient manufacture of various composite parts by closed mold process.
Density(g/m²)
CFM985-300
CFM985-450
CFM985-600
CFM981-450
CFM983-300
Moisture Content(%)
≤ 0.2
≤0.2
≤0.2
≤0.2
≤0.2
Binder Content(%)
1.8 ~ 8.5
1.8 ~ 8.5
1.8 ~ 8.5
1.8 ~ 8.5
1.8 ~ 8.5
Loss on Ignition (%)
5±1.4
5±1.4
5±1.4
5±1.4
5±1.4
Sizing
Silane
Silane
Silane
Silane
Silane
-
Supply Chains
-
Advanced Technology
-
Reasonable Price
-
Excellent Service
Customer Review
They made the comparation test with the currently supplier 3B, finally got sucessfully results and choose us.
-
1.What product advantages do we have?Compared with our peers, we have lower prices. Regular specifications, such as 300G/450G are in good stock. COA and shipping pictures are available.
-
2. What's your regular packing and Is it possible to pack in large rolls?If width is 1.04m, 2 vertical brackets are available.if width is more than 1.04m, the horizontal brackets are stacked on top of the vertical brackets.
Pack in large rolls of course ok. 250m roll length, 550mm roll diameter, 1 bracket 4 rolls, no carton and with wooden frame. -
3. MOQ?We don't have min order quantity requirement, we can support our customers from small quantity.
Free samples are available. -
4. How to ensure the stability of quality?Before producting, we will send samples to our customers and keep samples and labels. During producting,workers strictly control the quality to a large extent.
After producting,COA is available which is consistent with the sample. -
5. Can the roll width be customized?Yes, we can customize the roll width for you.
For CFM, the max width wecan produce is 1850MM.
For CSM, the max width wecan produce is 3200MM.
Since established in 2012, our company has been adhering to the corporate mission of "intelligent manufacturing in China to the World", and is committed to providing customers with high-quality, high-performance and comprehensive composite material solutions.
